- Product details
- Equipment
- Application
- Two-part anchorage, especially suitable for longitudinal tensioning of beams and bridges
- Continuous introduction of prestressing force into the member thanks to an interaction of the wedge plate and the multiplane anchor body
- Subsequent insertion of strands is facilitated by the separation of anchor body and wedge plate
- Safe installation and problem-free tensioning thanks to optimized centering of both anchor parts and the hydraulic jack
|
- Fixed coupler that is used at the joints of construction segments and that allows the user-defined lengthening of MA Multiplane Anchorage Tendons.
- Tendon Coupler R is also used as live end tensioning anchor
- Easy and safe installation of individual strands in the coupled tendon
|
- Movable coupler that can be located almost anywhere in the structure and allows the individual lengthening of MA Multiplane Anchorage tendons.
- Utilization is independent of joints
- Coupler D can be used in small construction cross-sections
- Easy and safe installation of individual strands through individual strand sockets
|
- Single unit anchorage, primarily used for post-tensioning plate-like structures and for transverse post-tensioning of bridges
- Small edge and center distances allow for an economical anchorage layout and extremely thin plate dimensions.
- Rib Plate Anchorage SDR with extended plate can be used as an alternative to type SD even with relatively low concrete strengths.
|
- This anchorage is a bonded anchorage and is often used with prefabricated tendons
- The Bond Head Anchorage can also be fabricated directly inside the structure
- Special deformations of the strand wires in the head assure safe load transfer in static as well as in dynamic applications
- Both flat and rectangular bond head patterns are possible
|
- Utilized in plate-shaped and wall-shaped structures (off-shore structures, LNG tanks, etc.)
- The 180° loop is positioned in the center of the tendon
- Simultaneous stressing at both ends
|
